Green DIY energy is a great way to incorporate renewable energy into your home for a small investment, in most cases less than $200. Many times a professional system and installation will be quite expensive but you can still use renewable energy without breaking the bank. The most popular DIY renewable energy is creating your own solar power system.

There are many resources available that can provide you all the information you need to know to build your own solar system. You have two options with a solar system. You can take the extra energy produced and use it to charge batteries that you can use when there isn't any sun or you can have your system connected to the electrical grid. Connecting your system to the grid may be more expensive as the electrical company will need to do this.

Other types of do it yourself green energy systems include building your own wind turbine or a type of magnetic energy system. If you live in a very windy area then a wind turbine can be low cost to build and install and you can get huge returns on the power produced. A magnetic system only needs about $120 and you can generally power your home off a magnetic system

There are also many adjustments you can make to your home that are all DIY and can help to reduce your electrical energy bill. There are many ways to create a greener environment that do not necessarily cost a lot and can be done yourself. The largest drain on your electricity is leaving appliances plugged in when they are not being used. Your TV alone uses 75% of its power when it is shut off.

Insulation is also very important for getting the most form your green energy. If your home is not properly insulated then all the hat and cool air will escape. With good green insulation you can make sure your home stays warm in the winter and cool in the summer without having to constantly keep the heat or air conditioner running. This greatly decreases your energy consumption.

It is important that you have good air flow throughout your home and make sure you stop up gaps where air can escape. Nothing should be blocking your air vents and you should check your windows and roof for leaks. Using timers and motion sensors can also decrease the amount of time lights are on.

The air flow in your home is also very important as you want to make sure your home does not have any blocked air flow spaces. Your furniture should be away from the vents and the roof and windows should be checked for leaks. It is also possible to save on energy by using times and motion sensors for outside lighting.